中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 3682.2-2018 塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第2部分:对时间-温度历史和(或)湿度敏感的材料的试验方法(中英文版) Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture |
|||
GB/T 13240-2018 高炉用铁球团矿 自由膨胀指数的测定(中英文版) Iron ore pellets for blast furnace feedstocks—Determination of the free-swelling index |
|||
GB/T 3682.1-2018 塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分:标准方法(中英文版) Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method |
|||
GB/T 36793-2018 橡塑材料中增塑剂含量的测定 气相色谱质谱联用法(中英文版) Determination of platicizers in rubber-plastics—Gas chromatography-mass spectrometry method |
|||
GB/T 14201-2018 高炉和直接还原用铁球团矿 抗压强度的测定(中英文版) Iron ore pellets for blast furnace and direct reduction feedstocks—Determination of the crushing strength |
|||
GB/T 36921-2018 牙膏中维生素B2、维生素B3和维生素B6的测定-高效液相色谱法(中英文版) Determination of vitamin B2, vitamin B3 and vitamin B6 in toothpaste—High performance liquid chromatography |
|||
GB/T 1043.2-2018 塑料 简支梁冲击性能的测定 第2部分:仪器化冲击试验(中英文版) Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test |
|||
GB/T 7755.1-2018 硫化橡胶或热塑性橡胶 透气性的测定 第1部分:压差法(中英文版) Rubber,vulcanized or thermoplastic—Determination of permeability to gases—Part 1:Differential-pressure methods |
|||
GB/T 36690-2018 工业废液处理污泥中铜、镍、铅、锌、镉、铬等26种元素含量测定方法(中英文版) Method of determination for 26 elements(copper,nickel,lead,zinc,cadmium,chrome etc.) content in the sludge from industrial waste liquid treatment |
|||
GB/T 36532-2018 纤维增强塑料 热固性模塑料和预浸料 固化特性测定(中英文版) Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics |
|||
GB/T 36374.2-2018 塑料 砜聚合物模塑和挤出材料 第2部分:试样制备和性能测定(中英文版) Plastics—Sulfone polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties |
|||
GB/T 36214.1-2018 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第1部分:通则(中英文版) Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles |
|||
GB/T 36214.3-2018 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分:低温法(中英文版) Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method |
|||
GB/T 36214.2-2018 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分:普适校正法(中英文版) Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method |
|||
GB/T 36214.4-2018 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分:高温法(中英文版) Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method |
|||
GB/T 36214.5-2018 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分:光散射法(中英文版) Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection |
|||
GB/T 2408-2008/XG1-2018 《塑料-燃烧性能的测定-水平法和垂直法》国家标准第1号修改单(中英文版) Plastics - Determination of burning characteristics - Horizontal and vertical test |
|||
GB/T 37199.2-2018 塑料-聚丁烯(PB)模塑和挤出材料-第2部分:试样制备和性能测定(中英文版) Plastics—Polybutene(PB) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties |
|||
GB/T 37196-2018 塑料-聚醚多元醇聚合物多元醇-醛酮含量的测定(中英文版) Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones |
|||
GB/T 1040.1-2018 塑料-拉伸性能的测定-第1部分:总则(中英文版) Plastics—Determination of tensile properties—Part 1:General principles |
找到:827條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [7] [8] [9] [10] [11] [12] [13] |